Posted on Leave a comment

Daves CUMonitor gets an NRGDiverter

Dave’s been running with an CUMonitor for a while now and wanted to investigate driving his underfloor heating using a NRGDivert. On the 15th of May one was installed after some testing we found that the underfloor heater only consumed about 1.4 Amps when fully on.  After further investigations we found out that the under floor heating was controlled by WIFI already and the only convenient place to install the NRGDiverter was before the WIFI underfloor heating controller. This meant that the high speed switching of the supply could damage the WIFI switch. So A 100% on/off mode was added to NRGDivert.

And the WIFI Switch was controlled by a 3rd party App consequently this NRGDiverter was controlling nothing .